HOW TO RESET /REMOVE /BYPASS FORGOTTEN BIOS OR CMOS PASSWORD

BIOS PASSWORD ARE USED TO ADD SOME EXTRA SECURITY TO COMPUTER.YOU CAN EITHER SET A PASSWORD TO PREVENT ACCESS TO BIOS SETTINGS OR TO PREVENT PC FROM BOOTING.
BUT SOMETIME THIS EXTRA SECURITY MIGHT BECOME A PAIN WHEN YOU FORGET THE BIOS PASSWORD OR SOMEONE CHANGES YOUR SYSTEM BIOS PASSWORD INTENTIONALLY.

BUT THERE IS NO NEED TO WORRY.THERE ARE MANY KNOWN WAYS TO RESET/ REMOVE/BYPASS THE PASSWORD:

                                      BY REMOVING CMOS BATTERY

 
ALMOST ALL MOTHERBOARDS USE A SMALL COIN SIZED CMOS BATTERY TO STORE ALL BIOS SETTINGS ALONG WITH THE PASSWORD.TO RESET THE PASSWORD ,UNPLUG THE PC , OPEN THE CABINET AND REMOVE THE CMOS BATTERY FOR APPROX.15-30 MINUTES AND THEN PUT IT BACK.IT'LL RESET ALL BIOS SETTINGS AS WELL AS THE PASSWORD AND YOU'LL NEED TO RE-ENTER ALL SETTINGS.

                          BY USING MOTHERBOARD JUMPER

ALMOST ALL MOTHERBOARD CONTAIN A JUMPER THAR CAN CLEAR ALL CMOS SETTINGS ALONG WITH THE BIOS PASSWORD.THE LOCATION OF THIS JUMPER VARIES DEPENDING UPON THE MOTHERBOARD BRAND.YOU SHOULD READ YOUR MOTHERBOARD MANUAL TO CHECK ITS LOCATION.IF YOU DON'T HAVE THE MANUAL THEN LOOK FOR THE JUMPER NEAR THE CMOS BATTERY.MOST OF THE  MANUFACTURER LABEL THE JUMPER AS CLR.CLEAR,CLEAR CMOS ETC.

WHEN YOU FIND THE JUMPER ,LOOK CAREFULLY WILL BE 3 PINS AND THE JUMPER WILL BE JOINING THE CENTER PIN TO EITHER LEFT OR RIGHT PIN.WHAT YOU NEED TO DO, IS REMOVE THE JUMPER AND JOIN THE CENTER PIN TO THE OPPOSITE PIN.
E.G IF THE JUMPER JOINS CENTER PIN TO LEFT PIN,THEN REMOVE IT AND JOIN CENTER PIN TO RIGHT PIN.NOW WAIT FOR A FEW SECONDS AND THEN AGAIN REMOVE THE JUMPER AND JOIN THE CENTER PIN TO LEFT PIN.
                            

                         PLEASE SHARE THIS BLOG